Sulfuric acid injection in copper heap leaching

Copper mining from oxide ores demand sulfuric acid that percolates the heap leaching pill. From there acid is debilitated while copper goes to the electro winning process.

LEWA process pumps are used to reinject sulfuric acid at 98% into the main pipelines that go to the heap leach sprinklers, recovering the concentration with safety, efficiency and long lifecycle, while reducing chemicals’ consumption.

Solutions

Safety, efficiency and economy to harsh applications

The following advantages are offered by the LEWA process pumps for the injection of sulfuric acid in tanks and pipelines:

  • Hermetically tight: reduced risks of accidents and waste of chemicals due to leakage
  • High efficiency: energy in mines is a limited resource. The LEWA process pumps have a higher efficiency than centrifugal ones, demanding less power to run and smaller motors, cables and panels 
  • Low maintenance: pumped fluid does not have contact with rotating parts, while all movable parts operate in protective, lubricating hydraulic fluid 
  • Easy control: pumped volume is known and proportional to motor speed, making it easy to control the concentration of the solution 
  • Lowest downtime: often more than 10,000 hours of continuous operation 
  • Flexibility: landscape of mine sites changes all time, so does the pump installation. Our pumps keep the desired flow rate regardless the new counterpressure of the installation
LEWA pump skids

Background

Copper oxide heap leaching 

Copper oxide ores are processed using aqueous solutions to extract and purify copper in three steps:

Heap leaching is the use of percolating chemical solutions to leach out metals. Following mining, transporting and crushing to a consistent gravel-size, the ore is piled into a heap on top of an impenetrable layer on a slight slope. The leaching reagent (dilute sulfuric acid) is sprayed through sprinklers on top of the heap pile and allowed to trickle down through the heap, where it dissolves the copper from the ore. The resulting solution of sulfuric acid and copper sulfate is collected in a small pool. Copper concentration is around 65%.

Next step is solvent extraction. The leach solution is mixed vigorously with a solvent. The copper migrates from the leach solution into the solvent. The two liquids are then allowed to separate based on solubility, with copper remaining in solution in the solvent, and impurities remaining in the leach solution. 

The leftover leach solution is then recycled by adding additional acid – the LEWA pump application – and sent back to the sprinklers in the heap leaching process.

The last step is electro winning. An electrical current passes through an inert anode (positive electrode) and through the copper solution from the previous step, which acts as an electrolyte. Positively-charged copper ions (called cations) come out of solution and are plated onto a cathode (negative electrode) as 99.99% pure copper.

Industries

Pumping solutions for mining and metal and mineral processing

Companies in the mining, metal and minerals sector all over the world rely on LEWA pumps and systems in their processes.

Products

LEWA ecoflow® diaphragm metering pump

LEWA ecoflow diaphragm metering pump all around talent The ecoflow® diaphragm metering pump from LEWA is a true all-around talent in the field of metering and mixing and can be used in all industries.

LEWA ecoflow ® packed plunger metering pump

LEWA ecoflow packed plunger pump The LEWA ecoflow® packed plunger metering pump is the high-performance and economical metering pump for simple pumping or metering tasks.

LEWA ecosmart® diaphragm metering pump

LEWA ecosmart diaphragm metering pump The LEWA ecosmart® diaphragm metering pump is the inexpensive metering pump for various applications and can be ordered quickly and conveniently through the online store.

LEWA ecodos® mechanical diaphragm metering pump

LEWA ecodos diaphragm metering pump The ecodos® mechanical diaphragm metering pump from LEWA is suitable for all pumping and metering tasks in the low-pressure range.

LEWA ecoflow® process pumps for high-pressure applications

LEWA ecoflow process pump The LEWA ecoflow process diaphragm pump is the top performer among innovative and universal process pumps for high-pressure process technology.

LEWA triplex® process pumps for high-pressure processes

LEWA triplex process pump LEWA triplex is the most compact process pump in the world for high-pressure processes in all branches of industry. Contact us, we are happy to help!

Nikkiso Non-Seal® centrifugal canned motor pump

NIKKISO Non seal canned motor pump The NIKKISO Non-seal canned motor pump is perfectly suited for transfer and circulation tasks in the chemical industry. We are happy to help you make your selection.

Wilden standard air-operated diaphragm pump

Wilden air-operated pump Wilden standard air operated double diaphragm pumps from your industrial pumps sales partner. We are happy to help.

LEWA Pump Skids

LEWA Pump Skids Ready-to-operate, custom-designed pump skid units with a small-footprint design for the oil and gas production industries. Consult us!

LEWA Bellows Pulsators

LEWA bellows pulsators LEWA bellows pulsators for extraction processes and separating substance mixtures. Contact us, we are happy to help!

Customer-Specific Metering Systems from LEWA

LEWA customer specific metering systems LEWA provides you with custom-designed metering systems according to your specifications. Trust in our experience gained from 60 years of metering technology.

Get updates

Subscribe to our newsletter!

Get LEWA insights on products, applications and the business of metering fluids. Subscribe now for free.

Follow us

LEWA is on Linkedin LEWA is on YouTube
© 2019 LEWA GmbH
© 2019 LEWA GmbH